BERMOCOLL EHM 500 is a high efficiency associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water based paints.
Bermocoll EHM 500
Ethyl hydroxyethyl cellulose
BERMOCOLL EHM 500 is used as a thickener in all types of latex paints, intended for interior as well as for exterior use. BERMOCOLL EHM 500 improves high shear viscosity, roller spatter, flow and levelling. BERMOCOLL EHM 500 has a high resistance to enzymatic degradation. Normal dosage is 0.1 - 0.4 % calculated on the total paint weight. In order to facilitate dispersion in water, BERMOCOLL EHM 500 has been treated to give a pH-dependent dissolvingIt should be added to neutral or slightly acid water. To speed up the dissolving process, pH should be increased to above 8 by using alkaline ingredients such as ammonia or alkaline pigment dispersants.If adjustment of the final paint viscosity is necessary, highly concentrated slurry either in water or in an organic solvent should be used. It is not recommended to add the product as a dry powder after pigment grinding. Under the alkaline pH conditions at that stage BERMOCOLL EHM 500 will dissolve too rapidly with the risk of lump formation.
Paints and Coatings